This project requires no knowledge of electronics, and it will not get much into that....

---

Welcome. before we get started, here are some things you should know:

• If you are looking for an even cheaper and faster project, this one might have your interest.
• If you have never build a robot before, you do not need special materials to build robots.

---

OK - Now let´s get started :)

---

You Need

• 4 to 6 high rpm (100 rpm, 200 rpm etc.) plastic/metal geared motor.
• 1 wooden/fiber base
• 10 lead Wires
• 2 to 4 two way switch
• 4 to 6 tyres
• Grip
• 1 plastic case for remote
• Soldering Iron
• Soldering Flux
• Soldering Wire
• Saw
• Screw driver
• Wire Cutter
• Plaer
• Nut Bolts
• Drilling Machine
• M-seal
• Fevi Quick
• 6 Clamps
• Double Sided Adhesive Tape
  

Steps of Making Wireless Remote

Steps of makting Wired Remote

• Fix the switches on the remote case.

• Circuit diagram of Remote circuit is given below:

• Connect the circuit as shown in diagram given below

Steps of making Robot

---

OK! You have ordered the stuff, received your package(s), you want to build :) well.. Let´s get started!

• Firstly cut the BASE in proper dimensions by SAW.
  

• Fix the MOTORS on the base with the help of CLAMPS & NUT BOLTS.

• Connect the MOTORS in parallel(connect all positive terminal of all same sided motors with each other & negative terminal with each other & similarly on other side & then connect to supply) by WIRES. and then connect to the SWITCHES.
  

•